Spring steel EN 10132 - 1/4 (DIN 17222)
Ø from 3 to 16 mm: strip C60S (C60)
Washers
Serrated lock washers
DIN 6798 V
Countersunk toothed washers
DIN 6798 V
The toothed washers DIN 6798 V are exclusively recommended when clamping conical head screws.
| SIZE | WASHER DIMENSIONS | SUPPLEMENTARY DATA | WEIGHT | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
screw
mm
|
d
H13
|
tol
|
D
≈
|
s
|
tol
|
no. of
teeth
|
Load capacity test
(N)
|
Kg/1000
|
||
| 3 | 3,20 | 0,180 | 0 | 6,00 | 0,20 | 0,015 | -0,015 | 12 | 2.500 | 0,040 |
| 3,5 | 3,70 | 0,180 | 0 | 7,00 | 0,25 | 0,015 | -0,015 | 12 | 2.500 | 0,074 |
| 4 | 4,30 | 0,180 | 0 | 8,00 | 0,25 | 0,015 | -0,015 | 14 | 2.500 | 0,100 |
| 5 | 5,30 | 0,180 | 0 | 9,80 | 0,30 | 0,020 | -0,020 | 14 | 2.500 | 0,142 |
| 6 | 6,40 | 0,220 | 0 | 11,80 | 0,40 | 0,020 | -0,020 | 16 | 3.000 | 0,273 |
| 8 | 8,40 | 0,220 | 0 | 15,30 | 0,40 | 0,020 | -0,020 | 18 | 3.000 | 0,430 |
| 10 | 10,50 | 0,270 | 0 | 19,00 | 0,50 | 0,025 | -0,025 | 20 | 4.000 | 0,870 |
| 12 | 13,00 | 0,270 | 0 | 23,00 | 0,50 | 0,025 | -0,025 | 26 | 4.000 | 1,292 |
| 14 | 15,00 | 0,270 | 0 | 26,20 | 0,60 | 0,025 | -0,025 | 28 | 6.000 | 2,110 |
| 16 | 17,00 | 0,270 | 0 | 30,20 | 0,60 | 0,025 | -0,025 | 30 | 6.000 | 2,740 |
Dimensions in mm
View technical data
Materials used
discoverHardness
HV 350 ÷ 425, HRC 36 ÷ 43
Standard surface finish
discover- self-finished and oiled
- electrolytic zinc plating
Packaging
discover
Additional information
Packaging on request
Upon request and for quantities / prices to be established, toothed washers DIN 6798 V can be supplied in bulk packaging.
Surface Finishes on request
Upon request and for quantities / prices to be established, toothed washers DIN 6798 V can be supplied with the following surface finishes:
Phosphating
Mechanical Zinc Plating
| SIZE | WASHER DIMENSIONS | SUPPLEMENTARY DATA | WEIGHT | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
screw
mm
|
d
H13
|
tol
|
D
≈
|
s
|
tol
|
no. of
teeth
|
Load capacity test
(N)
|
Kg/1000
|
||
| 3 | 3,20 | 0,180 | 0 | 6,00 | 0,20 | 0,015 | -0,015 | 12 | 2.500 | 0,040 |
| 3,5 | 3,70 | 0,180 | 0 | 7,00 | 0,25 | 0,015 | -0,015 | 12 | 2.500 | 0,074 |
| 4 | 4,30 | 0,180 | 0 | 8,00 | 0,25 | 0,015 | -0,015 | 14 | 2.500 | 0,100 |
| 5 | 5,30 | 0,180 | 0 | 9,80 | 0,30 | 0,020 | -0,020 | 14 | 2.500 | 0,142 |
| 6 | 6,40 | 0,220 | 0 | 11,80 | 0,40 | 0,020 | -0,020 | 16 | 3.000 | 0,273 |
| 8 | 8,40 | 0,220 | 0 | 15,30 | 0,40 | 0,020 | -0,020 | 18 | 3.000 | 0,430 |
| 10 | 10,50 | 0,270 | 0 | 19,00 | 0,50 | 0,025 | -0,025 | 20 | 4.000 | 0,870 |
| 12 | 13,00 | 0,270 | 0 | 23,00 | 0,50 | 0,025 | -0,025 | 26 | 4.000 | 1,292 |
| 14 | 15,00 | 0,270 | 0 | 26,20 | 0,60 | 0,025 | -0,025 | 28 | 6.000 | 2,110 |
| 16 | 17,00 | 0,270 | 0 | 30,20 | 0,60 | 0,025 | -0,025 | 30 | 6.000 | 2,740 |
Dimensions in mm